Thermometers with switch contacts

Wherever the process temperature has to be indicated locally and, at the same time, limit values must be monitored, thermometers with switch contacts find their application. The switch contacts make or break the circuit dependent upon the pointer position of the indicating measuring instrument. If the reading is significantly above or below a set value, they trigger an alarm, hence also the term “alarm contact”. The instruments are also suitable for starting, stopping or switching processes.

Sales contact

WIKA Instrumentation PTE. LTD.

Tel.:
+65 6844 5506
Fax:
+65 6844 5507
info@wika.sg

FAQ

Why must the clearance between the thermowell stem wall and the bimetal coil be as low as possible?

Since the heat transfer from the wetted thermowell stem to the bimetallic spring is improved.

Does the ambient temperature have any influence on the measuring tube within the case of the gas-actuated instrument?

Yes, that is why a bimetal compensation is installed between the movement and the measuring tube. This compensation is technically limited within a specific range. For WIKA gas-actuated instruments the standard ambient temperature is approx. 23 ± 10 °C. ... More

Wish list - Documents (0)

There are currently no documents on your wish list. You can add any document from the download area to your wish list. To do this, select the desired language using the flag symbol.

The maximum number of 20 entries was reached.

To receive your download link via e-mail, enter your address here:

The e-mail address is invalid.